{"product_id":"sp-racing-f3-flight-controller-deluxe","title":"SP Racing F3 Flight Controller Deluxe","description":"\u003cp\u003eSP Racing F3 Flight Controller Deluxe\u003c\/p\u003e\n\u003cp\u003eThe SP Racing F3 Flight Controller Deluxe was designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I\/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU.\u003c\/p\u003e\n\u003cp\u003eThere are lots of cool features with this flight controller starting with a next-generation\u003cstrong\u003e STM32 F3 processor\u003c\/strong\u003e with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core. It also comes with a high capacity black box flight log recorder that will help you optimize your tuning without the guesswork.  Some more great features are the additional built-in sensors for altitude and direction with the barometer mounted on the bottom of the board for easy wind isolation. A dedicated output for programmable LEDs – great for orientation, racing and night flying. The no-compromise I\/O supports all the features at the same time.\u003c\/p\u003e\n\u003cp\u003eF3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source it allows you to contribute to the system. Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and community. No more second-hand information.\u003c\/p\u003e\n\u003cp\u003eThe F3 Deluxe gives you all the features you need for the heart of your aircraft, whether you’re into FPV racing, acrobatic flying or aerial photography it’s perfect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePins and Ports:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMicroUSB socket.\u003c\/li\u003e\n\u003cli\u003e4x 4pin JST-SH sockets (I2C, SWD, 2xUART)\u003c\/li\u003e\n\u003cli\u003e2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)\u003c\/li\u003e\n\u003cli\u003e8x 3pin through-holes for pin headers for ESC\/Servo connections.\u003c\/li\u003e\n\u003cli\u003e2x 4pin through-holes for pin headers for 2x serial ports.\u003c\/li\u003e\n\u003cli\u003e2x 2pin through-holes for pin headers for battery voltage and buzzer.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003eSince this is an Open Source Flight Controller Board, there are many manufacturers who are supplying this product. We have picked up the best quality products from the market and tested them for their functionality. And finally selected best amongst them. Our product works exactly same as we have described above in the description.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFollow the advice below for best performance and long-life of your flight controller:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eApply resin\/glue to reinforce JST-SH connectors – helps if you crash your aircraft.\u003c\/li\u003e\n\u003cli\u003eUsing an enclosure\/box for the flight-controller is recommended.\u003c\/li\u003e\n\u003cli\u003eInstall open-cell foam under the pressure sensor – sandwich some between the FC\u003c\/li\u003e\n\u003cli\u003eand frame.\u003c\/li\u003e\n\u003cli\u003eRoute motor\/battery wires as far away from the compass sensor (magnetometer)\u003c\/li\u003e\n\u003cli\u003eas possible.\u003c\/li\u003e\n\u003cli\u003eOnly install the BOOT jumper pins if you need them.\u003c\/li\u003e\n\u003cli\u003eUsing color-coded pin headers is recommended (not supplied), especially for VBAT\u003c\/li\u003e\n\u003cli\u003eheaders.\u003c\/li\u003e\n\u003cli\u003eDo everything you can to prevent vibrations reaching the accelerometer\/gyro sensor.e.g. balance props, motors, and secure everything\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eNo compromise I\/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED\u003c\/li\u003e\n\u003cli\u003eStrip + Battery Monitoring + Sonar + 8 motors – all at the same time!\u003c\/li\u003e\n\u003cli\u003e On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without\u003c\/li\u003e\n\u003cli\u003eguesswork ( Deluxe).\u003c\/li\u003e\n\u003cli\u003eNext-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster\u003c\/li\u003e\n\u003cli\u003eARM-Cortex M4 core.\u003c\/li\u003e\n\u003cli\u003e Stackable design – perfect for integrating with OSDs and power distribution boards.\u003c\/li\u003e\n\u003cli\u003e16 PWM I\/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.\u003c\/li\u003e\n\u003cli\u003eFull support for OneShot ESCs for easy PID tuning and a sharper response.\u003c\/li\u003e\n\u003cli\u003eSupports SBus, SumH, SumD, Spektrum1024\/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).\u003c\/li\u003e\n\u003cli\u003eDedicated output for programmable LEDs – great for orientation, racing and night flying.\u003c\/li\u003e\n\u003cli\u003eDedicated I2C port for connection of OLED display without needing flight battery.\u003c\/li\u003e\n\u003cli\u003eBattery monitoring ports for voltage and current.\u003c\/li\u003e\n\u003cli\u003eSonar support for precision low-altitude hold.\u003c\/li\u003e\n\u003cli\u003eBuzzer port for audible warnings and notifications.\u003c\/li\u003e\n\u003cli\u003eDeveloper friendly debugging port (SWD) and boot mode selection, unbreakable bootloader.\u003c\/li\u003e\n\u003cli\u003eSymmetrical design for a super tidy wiring.\u003c\/li\u003e\n\u003cli\u003e Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.\u003c\/li\u003e\n\u003cli\u003eBarometer mounted on the bottom of the board for easy wind isolation.\u003c\/li\u003e\n\u003cli\u003eLoop times up to ~2x as fast as previous-generation STM32F1 based boards.\u003c\/li\u003e\n\u003cli\u003eA configuration of the flight controller via a cross-platform GUI (Windows\/OSX\/Linux).\u003c\/li\u003e\n\u003cli\u003eSupports a variety of aircraft, tri copters, quadcopters, hexacopters, octocopters, planes and more.\u003c\/li\u003e\n\u003cli\u003eAvailable in Acro and Deluxe versions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e1 x SP Racing F3 Flight Controller With Case.\u003c\/p\u003e\n\u003cp\u003e4 x Connecting Cables.\u003c\/p\u003e\n\u003cp\u003e6 x Male Jumper Header.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"HHCRB","offers":[{"title":"Default Title","offer_id":43983977349370,"sku":"HHCRB2232","price":4360.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0489\/5296\/7332\/products\/IMAGE-1_4af2e01c-d1e2-4acd-9534-dd962c22c6e6.jpg?v=1676565493","url":"https:\/\/havochobby.in\/products\/sp-racing-f3-flight-controller-deluxe","provider":"Havoc Hobby","version":"1.0","type":"link"}